Welcome to our step-by-step guide on how to make and store spore prints for mushroom growing! If you’re a seasoned mycophile or just starting out in the world of cultivating mushrooms, this tutorial is a must-read. With clear instructions and helpful tips, we’ll take you through the process of creating high-quality spore prints for mushroom cultivation that will ensure healthy and robust mushroom growth. So grab your supplies and let’s get started!
What is a Spore Print and How is it Used?
A spore print is a tool used by mushroom growers to check the viability of a mushroom strain. To make a spore print, place a cap or stem of a fresh mushroom onto some sort of paper or foil. Then, wait for the spores to fall off, which usually takes 12-24 hours. Once the spores have fallen, you can store the paper in a dark, dry place until you’re ready to use it.
When you’re ready to use your spore print to grow something, simply sow the spores onto some sterile media (such as agar), and wait for them to germinate. If they do germinate, then you know that your spore print is viable and you can proceed with your mushroom-growing project!
Gathering Supplies Needed for Spore Prints
Making your own spore prints is a simple process that only requires a few materials. Here’s what you’ll need:
- 1-2 fresh mushrooms of the same species
- A sharp knife
- A piece of paper or foil
- A clear glass or jar
- Tape (optional)
Once you have all of your materials, you’re ready to begin!
Steps to Making Spore Prints
Assuming you have a fresh mushroom with a well-attached cap, start by gently wiping the cap surface with a dry cloth or paper towel to remove any debris.
- Place the mushroom cap gills down on a piece of white paper or computer printer paper. If you’re doing multiple spore prints, space them out so they don’t touch.
- Cover the mushrooms with an upturned bowl or another piece of paper to keep drafts from blowing your spores around, and wait 12 to 24 hours.
- Lift the bowl (being careful not to jostle the mushrooms), and check your prints. They should be pretty well-defined by now. If they’re not, give them a few more hours.
- Once they’re ready, use a razor blade, exacto knife, or scissors to carefully remove the mushroom from the paper – again, being careful not to disturb any spores that might have fallen off in the process.
- You can store your freshly made spore prints in ziplock bags in the fridge for future use.
Magic mushrooms are illegal throughout most of the United States, Canada, and Europe — but the spores are not.
This is because magic mushroom spores sold here don’t contain any of the active psychedelic substances called cubensis and psilocin. Hence you can order them without any worries from the best mushroom spores shop!
Storing Cubensis Spore Prints
It is important to know how to store your cubensis spore prints properly in order to maintain their integrity and prevent contamination. Here are some tips on how to store your spore prints:
- Store the spore prints in a cool, dark place. Light and heat can degrade the spores over time.
- Use an airtight container such as a zip-top bag or mason jar. This will keep the spores from drying out.
- If you are using a zip-top bag, it is best to put the bag inside of another container such as a tupperware before storing. This way, if the bag leaks, the spores will not be contaminated by anything else in your storage area.
- Write the date on the container so you know how old the spores are. Spores can last for many years if stored properly, but their viability does decrease over time.
Using the Collected Cubensis Spores for Cultivation
Assuming you’ve followed all of the previous steps correctly, it’s now time to use your spore prints for cultivation. This part is relatively simple, but there are still a few key things to keep in mind.
First, you’ll need to add some spores to your desired substrate. This can be done by a spore solution mixing them directly into the substrate, or by making a spore slurry and watering it onto the substrate. If you’re using a granular substrate like vermiculite, it’s best to mix the spores in well so that they’re evenly distributed.
Once the spores are added, you’ll need to incubate grow mushrooms in the substrate at the correct temperature and humidity for your chosen mushroom species. Depending on the species, this could be anywhere from 60-80 degrees Fahrenheit with high humidity (up to 95%). Once again, a terrarium or chamber is ideal for this purpose.
After a few weeks of incubation, you should start to see signs of growth as the spores germinate and begin colonizing the substrate. At this point, it’s important to maintain optimal conditions for growth, which may include slightly different temperatures and humidity levels than during incubation. After a few more weeks (or even months), you should have a fully colonized substrate that’s ready for a psychedelic showdown!
Troubleshooting and Common Mistakes
If you’re new to fungi and making spore prints, it’s important to know that there are a few common mistakes that can occur. The most common mistake is not waiting long enough for the spores to mature. Once the mushroom cap is placed on the paper, it can take up to 24 hours for the spores to mature and fall onto the paper.
Another common mistake is not storing the spore print in a dark, dry place. If the spore print is exposed to light or moisture, it will quickly degrade and become unusable. Finally, many people forget to label their spore prints. This may not seem like a big deal, but if you have multiple prints from different strains of mushrooms, it can be difficult to tell them apart without labels.
If you find yourself troubleshooting any of these common mistakes, don’t worry! With a little research and practice, you’ll be making beautiful spore prints in no time.
Making and storing spore prints
Conclusion
Making and storing spore prints for mushroom growing is a fun and rewarding process. With just a few simple steps, you can make your own spore prints that will help ensure healthy mushrooms which are sure to take you on a journey of self discovery. Remember to find the best online store to purchase and take samples from to maximize success with your spores.
Use appropriate safety measures when handling any fungal material, label your samples properly for accurate identification, use clean surfaces and materials when making spore prints, store them in an airtight container in a dry place away from light and humidity changes, and keep proper records of all transfers. Following these steps will ensure you have the right spores on-hand at all times so you can start cultivating fresh psychedelic mushrooms!
Buy Magic Mushroom Spores Online
The Mushroom Spore Store has Psilocybe cubensis magic mushroom spores for sale.
View our selection of Spore Syringes and buy cubensis Mushroom Spores Online at our store. The Mushroom Spore Store.
Each laboratory grade cubensis spore syringe is filled with 100% viable cubensis spores. Our experts test 1ml from each and every syringe in order to verify there is an abundance of spores prior to shipping.
Free shipping! Easy payment options! Trusted vendor. 100% contamination-free guarantee.
